Maxxon® MVP (Moisture Vapor Barrier)

Manufacturer:
Maxxon^® Corporation
920 Hamel Road
P.O. Box 253
Hamel, MN 55340
Phone: 1-800-356-7887 or (763) 478-9600
Fax: (763) 478-2431

Product Description:
Maxxon® MVP (Moisture Vapor Protection) is a unique 2-component, moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor and moisture through concrete floors and walls on or below grade. Maxxon MVP eliminates delamination of adhesives, floor coverings and coatings.

Product Advantages:

Water/Vapor Barrier Coating
Reduces moisture vapor emission
1-coat application
Underlayment system installed next day
Applied to moist or dry concrete
High alkalinity barrier

Technical Data:

Material Composition:	2-component epoxy
Color:	Clear
Density:	9.08 lbs/gal (1.09 ± 0.02 kg/L)
VOC Content, mixed:	0 lbs/gal (0 g/L)
Volume Solids:	100%
Flash Point Part A: Flash Point Part B:	>212°F (>100°C) >248 °F (>120°C)
Mixing Ratio:	100:50 (by weight)
Pot Life, approx:	35 Minutes at 85°F (30 °C)
Open to Foot Traffic:	after 12 hrs at 73°F (23 °C)
Curing Temperature:	minimum 50 °F (10 °C)
Full Strength:	after 7 days at 73°F
Adhesion to: dry concrete (7 days) (ASTM D-4541)	500 psi (3.5 MPa)

All data are average values obtained under laboratory conditions. In practical use temperature, humidity and absorbence of the substrate may influence the above given values.

Maxxon® MVP (Moisture Vapor Barrier) Data Sheet

Maxxon^® MVP (Moisture Vapor Barrier) Data Sheet